The high-speed mixer is a kind of mixing mechanical equipment with a wide range of applications. This kind of machine with high-efficiency mixing characteristics is favored and liked by friends. For example: a mixer suitable for coloring and drying of raw materials, in order to reasonably improve production efficiency, the feeding method during production is more important. The high-speed mixer is a kind of vertical mixer. The feeding mouth of the machinery and equipment is generally 1.5 meters above the horizontal. So what aspects should the user pay attention to when choosing the feeding method? Prowell Machinery recommends the following feeding methods for everyone: Feeding methods of PVC High-Speed Mixer
1. Feeding by screw feeder.
After the high-speed mixer is installed in place, the screw feeder is used to feed the mixing pot.
Generally, the height of the storage hopper of the feeding machine can be freely designed and manufactured. In the industry, the height of the storage hopper is generally designed to be 650-700mm. This height can effectively reduce the work intensity of workers during feeding. This feeding method feeds materials in the state of raw material powder, granules, etc. through the screw. According to the size of the high-speed mixer, the feeding amount can be controlled by the level meter or the time relay. The screw feeder has the characteristics of fast feeding, convenient operation and safety.
2. Feeding by vacuum feeder.
This is the feeding method through negative pressure vacuum. It is composed of a vortex air pump, a suction pipe, a suction pipe, a vacuum hopper, and an electrical control cabinet. Especially for powder feeding, it can effectively suppress dust spillover, and has the characteristics of fast feeding speed, small footprint, and high degree of automation.
The vacuum feeder can be placed according to the site conditions and is easy to use.
3. Manual feeding
Manual feeding is significantly time-consuming and labor-intensive, requiring actual operators to climb to the base of the mixer and open the lid to perform the feeding operation. Screw feeder feeding, vacuum feeding machine feeding, manual feeding. ,
These several methods are the feeding methods of PVC high-speed mixer, and friends can choose to use them according to their own conditions. Screw feeder and vacuum feeder can be automated. Relatively speaking, the overall high-speed mixer application investment cost is slightly higher.
The above are the most common feeding methods at this stage. Friends can choose the feeding method that suits them according to the product and requirements.