This FRP Rebar Making Machine is a special machine for the production of fiber reinforced materials. It mainly uses fiber materials as reinforcing materials,
resin as the body, adding a certain amount of additives, and drying and c uring fiber products at a certain temper ature.
The equipment is composed of creel, dipping device, winding device, heating device, traction device, cutting device, electriccabinet andpneumatic system.
Glass fiber has the advantages of high tensile strength, low elongation, good corrosion resistance, etc. Compared with carbon fiber and basalt fiber, this kind of raw material is easier to obtain, and the price is relatively simple, and the production process is relatively simple and mature, which is convenient for industrial promotion and application.
Epoxy vinyl resin contains less ester bonds, which improves its alkali resistance. The main chain contains more secondary hydroxyl groups, which improves the resin’s wettability and adhesion to glass fibers, and helps to improve the product’s performance. Mechanical strength.
The production process of FRP Rebar.
The pultrusion process is mainly to pass reinforcing materials such as felt, belt, and continuous untwisted yarn through the infiltrating resin, then pass through the garbage mold, and then draw by the tractor, so as to continuously produce products such as glass fiber ribs with unlimited length.
The winding process is a process in which the reinforced materials (continuous fiber bundles, fiber cloth, etc.) fully dipped in glue are wound on the core mold according to a certain rule, and then cured and demolded to make glass fiber reinforced products.
The mechanical strength of the glass fiber tendons is mainly determined by the fibers, and the main function of the matrix resin is to bond the bundles of fibers together for the transfer of stress and strain.
If the bond between the resin and the fiber is not good, the stress will not be effectively transmitted between the fibers, and it will be difficult for the fiber to bear the main load.
GFRP Composite Rebar Crawler Type Pultrusion Machine/FRP Fiberglass Rebar Making Machine
No | Name | Details |
GFRP Rebar Making Machine | ||
1 | Haul off Way | Rubber Block/Belt |
2 | Motor | 2.2KW*2 |
3 | Speed mode | Frequency/Servo Control |
4 | Transfer method | Sprocket drive |
5 | Production Speed | 0.5 ~ 2m/mim |
6 | Clamping method | pneumatic |
7 | Applicable Products | Frp Screw Rod/Glass fiber reinforced ribs |
8 | Oven power | 16kw |
9 | Winding speed | 0-285rpm |
10 | Production diameter | 6-36mm |
11 | Total power | 35kw |
12 | Installation size | 30000*1600*1000 |
13 | Weight | 3.5tons |
Because this equipment is a customized product, the above parameters are for reference only, please contact us if you need precise details.