FRP Rebar Making Machine/Fiberglass Reinforced Rebar Pultrusion Machine

The glass fiber rebar forming machine is a new type of equipment for producing glass fiber rebars. It can process different types of full-thread glass fiber reinforced ribs. It is mainly composed of extrusion system, pre-forming system, winding system, baking box, hydraulic traction, and electrical Control system, automatic cutting and other systems.

The glass fiber yarn placed on the creel is due to the tail traction system. After passing through the silk board, it is sent to the soaking tank, and there is resin in the feeding tank, and the glass fiber yarn is soaked with resin in the feeding tank. It is then combined into a bundle through a pre-forming system. In the mold, it is heated and melted by a heater. Extrusion molding by hydraulic system. After passing through the winding system, it becomes a full-thread glass fiber plastic rod body. (There is a silicone sheet at the front end of the feed tank, pre-forming system, and winding system, which is to ensure that the rod body is smooth and free of bubbles) Then enter the drying system for curing, and finally cut the rod body to the required length through the cutting assembly, and finally pass the product Inspection by the clerk and warehousing.