The new generation of material mixer is mainly for the mixing of lithium battery cathode materials, with high mixing efficiency and good uniformity.
The mixing pot of Ternary lithium Battery Material High Speed Mixer adopts a vertical structure. There are two layers of paddles in the pot body. Through the high-speed rotation of the paddles, the material moves along the tangential direction of the paddles and is thrown to the pot wall under the action of centrifugal force. And ascending along the wall, part of the rising material falls back to the center of the blade under the action of gravity, and the other part of the material hits the pot cover and falls. Then it was thrown up again. This ascending movement combined with the tangential movement caused the materials to collide with each other and cross-mix.
At the same time, the materials collide and rub against each other with the blades, the inner wall and the materials, causing the temperature to rise rapidly.
In addition, the baffles and side paddles of the Ternary Lithium Battery high-speed mixer disturb the material flow and cause it to form irregular motion.
And a strong vortex is formed near the baffle to promote further uniform dispersion and mixing of materials.
And in order to prevent the material from sticking to the pot and the blades from grinding, the pot wall is coated with Teflon material, and the blades are treated with tungsten carbide
